First Wave Connect LED Light Controller

Sunrise to moonlight, set from your phone.

Your First Wave light now works with the free FAViA app.
Here’s how to connect it, choose a lighting day for your reef and fine-tune it while you watch the tank.

One app for your whole reef.

This smart light lives inside FAViA — alongside your flow, dosing, livestock and water logs.

Before you start

What you’ll need

A First Wave aquarium

48 L, 78 L or 110 L, fitted with the First Wave Connect LED Light Controller.

The FAViA app

Free on the App Store and Google Play. Works on iPhone and Android.

Bluetooth switched on

Stand near the tank with Bluetooth and location services on.

Your home Wi‑Fi

Optional

Not needed to get started. Adds automatic updates for your controller later on.

Setup in four steps

From box to full control in minutes

Follow these in order the first time. Afterwards, you can jump straight to whichever screen you need.

1

Get FAViA and create your aquarium

  1. Download the free FAViA app from the App Store or Google Play.
  2. Sign in, or create an account if you’re new to FAViA.
  3. Create your aquarium. Give it a name you’ll recognise, such as “First Wave 48L”.

Already use FAViA for an AquaRay light, AccuDose or Reef Pump?
Just add the First Wave to the aquarium you already have.

2

Add your First Wave light controller

  1. Open your aquarium’s Equipment list and tap +.
  2. Your controller appears by name under FAViA Connect. It starts with “tmcFirstWave”.
  3. Tap it, then tap Connect. That’s it: no Wi‑Fi and no codes.

Can’t see your controller? Check that it’s powered on, you’re close to the tank, and Bluetooth and location services are switched on. Then tap the refresh arrow.

3

Pick a TMC lighting preset

The quickest way to a healthy, natural-looking day. Open the Schedule tab, choose TMC Presets, and pick one:

  1. Home Display: a natural day, timed so your tank looks its best in the evening.
  2. Shop Display: a full, bright day through opening hours. Ideal for retailers.

Set when your lights come on and go off, choose a maximum brightness, tap Preview to see the day as a graph, then tap Upload.

Good to know: uploading a preset replaces your current schedule.
Change light levels gradually so your fish and corals can adjust.

4

Make the day your own

Happy with the preset? You’re done. Want more control? Switch to Custom Schedule.

  1. Your whole day is drawn as a graph, with a marker showing where the light is right now.
  2. Tap any period, such as Sunrise or Moonlight, to change its start time and its white and blue levels.
  3. The light shows the new levels as you move the sliders, so you can judge the look on the tank itself.

Prefer numbers? Turn off Graph View to edit the schedule as a simple table.
The app keeps the periods joined up, so you can’t accidentally leave a gap in the day.

How your light’s day works

Five periods, two colours, every day

Your First Wave runs a natural day on its own clock, whether or not the app is open.
Each period has its own white and blue brightness, from 0 to 100%.

AquaRay daily lighting schedule White and blue channels across 24 hours. Both ramp up during sunrise (09:00 to 10:00) and hold at 100% through the day. At sunset (17:00 to 18:00) white fades to off while blue dims to 30% and stays on as moonlight until 20:00. Night Daytime Moon Night Sunrise Sunset WHITE 100% 0% BLUE 30% 100% 0% 00:00 03:00 06:00 09:00 12:00 15:00 18:00 21:00 24:00
Sunrise

Light gently ramps up from off.

Daytime

Holds steady at your chosen levels.

Sunset

Ramps gently back down.

Moonlight

A soft blue glow for evening viewing.

Night

Lights off, so your reef can rest.

Modes and buttons

Switch the look in a tap

Choose a mode from Manual Control in the app, or with the buttons on the light. Both stay in step.

Auto

Runs your schedule. This is the normal everyday setting.

Moonlight

Blue LEDs only. Great for night viewing and showing off fluorescent corals.

Daylight

White and blue together, for a bright look whenever you want it.

Lights off

One tap in the app. Handy for maintenance or a quiet evening.

The buttons on your controller

No phone to hand? The controller has three buttons that do the everyday jobs.

Middle button

Cycles through Auto, Moonlight and Daylight.

Up and Down

Change brightness in Moonlight and Daylight, in six steps from off to full.

Light now sliders in the app

Adjust the current period in Auto, then tap Save to keep it in your schedule.

Nice extras

Set it once, then let it run

Always on time

If your light’s clock drifts, the app offers to sync it with your phone in one tap, time zone and daylight saving included. Find it any time under Settings → Time.

Home Wi‑Fi, if you want it

In Settings → Home network, pick your network and enter the password. The app then reaches your controller anywhere in the house. Use your 2.4 GHz network.

Updates offered to you

When there’s a newer version for your controller, the app tells you and installs it over Wi‑Fi while showing progress. Keep the controller powered on until it finishes.

Questions

Frequently asked

No. Your controller connects and works over Bluetooth straight out of the box. Wi‑Fi is optional and adds automatic updates and control from anywhere in your home.

Not at the moment. You can control it over Bluetooth nearby, or over your home Wi‑Fi when your phone is on the same network.

Nothing changes. Your controller keeps its own clock and carries on running your schedule.

Yes. Your schedule and brightness levels are saved on the controller. If it’s been off for a long time, open Settings → Time and sync the clock with your phone.

Your normal home network with a password. If your router shows separate 2.4 GHz and 5 GHz names, choose the 2.4 GHz one. Networks that need a sign-in page or a username, such as hotel or office Wi‑Fi, won’t work.

Yes. The middle button changes the mode and Up/Down change brightness. Holding the middle button for 3 seconds clears the Wi‑Fi settings; holding it for 5 seconds restores factory settings.

Yes. Set white or blue to 0% and that colour switches fully off. If you still see a faint glow at sunrise or sunset, install the latest update from the app.

Yes. Sign in to FAViA with the same account on another iPhone or Android phone and your controller is there.

Yes. The First Wave Connect LED Light Controller is sold separately. Fit it in place of the basic controller that came with your aquarium, then follow the steps on this page.

One app for your whole reef

Your First Wave light sits in FAViA right alongside AquaRay lights and AccuDose dosers, so you can run the whole tank from one place.

Support your Local Fish Shop

Browse & BuyBrowse & Buy

Browse & Buy

Select your Local Fish ShopSelect your Local Fish Shop

Select your Local Fish Shop

Collect itCollect it

Collect it